NOHKEN振棒式料位開關VL15N/F-U停產了嗎?
Features
●Dust explosion proof protection,Class II Group E, F and G (File NO.E114303)
●Adjustable detection time delay
●High or Low fail-safe mode
General Description
The VL15-U is ideal for detecting fine powders, ordinary powder and granular materials and pellets. This "U" version is certified for use in dust explosion hazardous locations classified Class II, Group E, F and G by Underwriters Laboratories Inc.
電路圖
Model:VL15NU/VL15FU
Description:For use in Hazardous Locations
Mounting:
Standard:R1/JIS 5K 50A
Option:R,NPT 3/4 to 2/from 25A,JIS ANSI,DIN
Supply Power:120V AC 50/60HZ(90 to 132V AC allowable voltage)
240V AC 50/60HZ(180 to 264V AC allowable voltage)
Power Consumption:Approx.5VA Max.
Detection Time Delay:Approx.0.5 to 10 seconds for covered
Approx.5 seconds for free
Operating Temperature:
Housing:-20℃ to 60℃
Vibration rod:-20℃ to 100℃
Maximum Pressure:2MPa / 20bar
Maximum Humidity:95% RH
Sensitivity:Bulk density of 0.2g/cm3 Min.
Vibration Frequency:Approx. 400Hz
Cable Entry:3/4-14NPT×2
Protection:IP65
Certification:File ******4303, Class II, Groups E, F and G
Fail safe:High or Low by switch
Indication:Green LED for Power status
Red LED for Relay status
Yellow LED for Detection status
*1The notion is followed by the UL regulation. 1 HP (horse power)=745.6999W
*2Other materials are available.
Technical Notes
1. Since the VL15-U is approved as the complete assembly, any modification, disassembly, or replacement of
parts on site is impossible. Return the VL to NOHKEN for repair and/or replacement.
2. For top mounting in high silo in a hazardous area, use the VL522N or VL522F approved d2G4 by T.I.I.S.,Japan.
注意:此產品已經停產,詢價時請注意,如需替代品,請致電我司工程師詳細描述現場工況。
Features
●Dust explosion proof protection,Class II Group E, F and G (File NO.E114303)
●Adjustable detection time delay
●High or Low fail-safe mode
General Description
The VL15-U is ideal for detecting fine powders, ordinary powder and granular materials and pellets. This "U" version is certified for use in dust explosion hazardous locations classified Class II, Group E, F and G by Underwriters Laboratories Inc.
電路圖
Model:VL15NU/VL15FU
Description:For use in Hazardous Locations
Mounting:
Standard:R1/JIS 5K 50A
Option:R,NPT 3/4 to 2/from 25A,JIS ANSI,DIN
Supply Power:120V AC 50/60HZ(90 to 132V AC allowable voltage)
240V AC 50/60HZ(180 to 264V AC allowable voltage)
Power Consumption:Approx.5VA Max.
Detection Time Delay:Approx.0.5 to 10 seconds for covered
Approx.5 seconds for free
Operating Temperature:
Housing:-20℃ to 60℃
Vibration rod:-20℃ to 100℃
Maximum Pressure:2MPa / 20bar
Maximum Humidity:95% RH
Sensitivity:Bulk density of 0.2g/cm3 Min.
Vibration Frequency:Approx. 400Hz
Cable Entry:3/4-14NPT×2
Protection:IP65
Certification:File ******4303, Class II, Groups E, F and G
Fail safe:High or Low by switch
Indication:Green LED for Power status
Red LED for Relay status
Yellow LED for Detection status
*1The notion is followed by the UL regulation. 1 HP (horse power)=745.6999W
*2Other materials are available.
Technical Notes
1. Since the VL15-U is approved as the complete assembly, any modification, disassembly, or replacement of
parts on site is impossible. Return the VL to NOHKEN for repair and/or replacement.
2. For top mounting in high silo in a hazardous area, use the VL522N or VL522F approved d2G4 by T.I.I.S.,Japan.
注意:此產品已經停產,詢價時請注意,如需替代品,請致電我司工程師詳細描述現場工況。